If you put excessive oil in the car, the car will be destroyed. Putting Bleach in the gas tank and putting too much oil in the car both ways can ruin a car without evidence. What kind of situation can result in water entering the cylinders? There are many examples, like driving in a downpour or going through a deep puddle. This is one of the reasons that flood-damaged vehicles are often totaled afterward. More information https://telegra.ph/Keeping-Your-Ride-Smooth-The-Importance-and-Cost-of-Tire-Balancing-05-31 When storing suede remember to keep in a cool, dry space away from direct sunlight, which can quickly fade suede. The Mercedes-Benz EQS EV undergoing wind tunnel testing Photo by Mercedes-Benz. Yes. The proper detergents in the correct concentration can dissolve engine sludge, deposits and varnish. Most MAF sensors can be restored to full operating condition with a simple cleaning. To clean your MAF sensor, buy a can of MAF Sensor Cleaner from any auto parts store. Remove the sensor from the air duct by loosening the worm drive clamps with a screwdriver or socket. Then aim the spray cleaner directly at the sensing elements inside the MAF housing. Soak the sensing elements but don’t touch them with your fingers, rag or brush—they’ll break. Let the solvent dry, then reinstall the MAF. “Check Engine“, “Service Engine Soon” or “Reduced Power” lights or warning messages on your dash mean your car’s computer has detected a problem with the engine or transmission and stored a trouble code in its memory. In most cases, the problem is caused by a faulty sensor that you can probably replace yourself. First, though, you have to get the trouble code from the computer.