Valve Cover Gasket Replacement Cost. “The Innoson factory will be situated at Naze Owerri in Imo State. We have already acquired about 150,000sqm land for this project and construction works are ongoing,” he said. More information https://telegra.ph/The-Thrill-of-Ten-Exploring-Cars-with-V10-Engines-05-31 What is the best way to destroy a car engine? Tightening the valves too much will also disrupt the function of the engine. So, the debate is not tight valves vs. loose valves but finding the perfect spot that ensures the engine's best performance. Grab a rag or tissue, pop the hood and remove the dipstick (check your owner’s manual if you don’t know where it is). Wipe the dipstick with the rag and reinsert it into the dipstick tube, making sure it seats all the way (goes all the way in). Pull the dipstick out again to check your oil level. You’ll see marks, notches or holes on the dipstick indicating the “FULL” and “ADD” levels. If the oil appears below the ADD mark, you’re out of oil. Call a friend and ask them to bring you at least four quarts of the proper oil for your vehicle(find the oil specs for your car on the oil filler cap or in the owner’s manual). Add just enough oil to bring the oil level up to the full mark on the dipstick, then drive your car to a shop to have it checked for leaks or an oil consumption issue. Putting Coca-Cola into the gas tank is one way to ruin a car engine completely. But it depends on the amount of soft drink in the car gas tank. Not only Coca-Cola, but any soft drink pouring a significant amount into the gas tank can also ruin your car engine completely. We apologize, but this video has failed to load.